GB/T 1425-1996 贵金属及其合金熔化温度范围的测定 热分析试验方法
作者:标准资料网 时间:2024-05-22 02:42:25 浏览:9853
来源:标准资料网
基本信息
标准名称: | 贵金属及其合金熔化温度范围的测定 热分析试验方法 |
英文名称: | Determination of melting temperature range for precious metals and their alloys-Testing method of thermal analysis |
中标分类: |
冶金 >>
金属理化性能试验方法 >>
金属物理性能试验方法 |
ICS分类: |
冶金 >>
金属材料试验 >>
金属材料的其他试验方法
|
替代情况: | GB 1425-1978 |
发布部门: | 国家技术监督局 |
发布日期: | 1996-11-04 |
实施日期: | 1997-04-01 |
首发日期: | 1978-09-29 |
作废日期: | 1900-01-01 |
主管部门: | 中国有色金属工业协会 |
提出单位: | 中国有色金属工业总公司 |
归口单位: | 全国有色金属标准化技术委员会 |
起草单位: | 中国有色金属工业总公司 |
起草人: | 刘雄 |
出版社: | 中国标准出版社 |
出版日期: | 1997-04-01 |
页数: | 平装16开, 页数:9, 字数:14千字 |
适用范围
本标准规定了采用差热分析仪(DTA)或差示扫描量热计(DSC)测定贵金属及其合金熔化温度范围的方法。本标准适用于熔化开始时呈现“一致性熔化过程”为特征的贵金属及其合金的固相线温度及液相线温度的测定。本标准也适用于其余类型贵金属合金的液相线温度、其他种类金属合金的相应特征温度以及能呈现明显峰形的固相转变温度的测定。本标准的试验温度范围取决于所采用的仪器,通常为室温~1500℃。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 冶金 金属理化性能试验方法 金属物理性能试验方法 冶金 金属材料试验 金属材料的其他试验方法
【英文标准名称】:Aluminiumandaluminiumalloys-Testmethods-Earingtestforsheetandstrip
【原文标准名称】:铝及铝合金试验方法.薄板材和带材的耳索试验
【标准号】:BSEN1669-1997
【标准状态】:现行
【国别】:英国
【发布日期】:1997-06-15
【实施或试行日期】:1997-06-15
【发布单位】:英国标准学会(BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:粗糙度(表面);直径;材料变形加工;试验条件;高度;试验设备;带材;铝合金;半径;铝;尺寸测量;薄板材;尺寸;试样
【英文主题词】:
【摘要】:ThisEuropeanStandardspecifiesthemethodfordeterminingtheearheightofsheetandstripofnominalthicknessesfrom0,08mmto6mmafterdeepdrawing.
【中国标准分类号】:H61
【国际标准分类号】:77_150_10
【页数】:14P;A4
【正文语种】:英语
【英文标准名称】:StandardSpecificationforPrecastReinforcedConcreteMonolithicBoxSectionsforCulverts,StormDrains,andSewers
【原文标准名称】:涵洞、暴雨排水管和下水道用的预制钢筋混凝土箱型部件用标准规范
【标准号】:ASTMC1433-2007a
【标准状态】:现行
【国别】:
【发布日期】:2007
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:C13.07
【标准类型】:(Specification)
【标准水平】:()
【中文主题词】:混凝土;建筑;施工材料;涵洞;预制混凝土;增强的;下水道
【英文主题词】:
【摘要】:1.1Thisspecificationcoverssingle-cellprecastreinforcedconcreteboxsectionscastmonolithicallyandintendedtobeusedfortheconstructionofculvertsandfortheconveyanceofstormwaterindustrialwastesandsewage.1.2ThisspecificationisthecompaniontoSISpecificationC1433M;therefore,noSIequivalentsareshowninthisspecification.Note18212;Thisspecificationisprimarilyamanufacturingandpurchasingspecification.However,standarddesignsareincludedandthecriteriausedtodevelopthesedesignsaregiveninAppendixX1.Thesuccessfulperformanceofthisproductdependsupontheproperselectionoftheboxsection,bedding,backfill,andcarethattheinstallationconformstotheconstructionspecifications.Thepurchaseroftheprecastreinforcedconcreteboxsectionsspecifiedhereiniscautionedthatpropercorrelationoftheloadingconditionsandthefieldrequirementswiththeboxsectionspecified,andprovisionforinspectionattheconstructionsite,arerequired.
【中国标准分类号】:Q81
【国际标准分类号】:23_040_50
【页数】:25P.;A4
【正文语种】: